Connecting The Converter To The Servopack; Connecting The Connectors; Interconnecting Terminals - YASKAWA JUSP-MD D01A Series User Manual

3 Wiring and Connection

3.2.1 Connecting the Connectors

3.2

Connecting the Converter to the SERVOPACK

3.2.1

Connecting the Connectors

Connect CN901 and CN103 on the SERVOPACK and converter as shown in the following figure.
Converter
IO signal connection cable JZSP-CVI02-A4-E
24-VDC control power
supply cable
3.2.2

Interconnecting Terminals

Use the busbars that are provided with the converter to connect the P and N terminals between the SERVO-
PACK and the converter.
The bus bars can be connected in any direction.
3-14
SERVOPACK
Cable Name Cable Model
JZSP-CVG00-A4-E
CN103: Control power supply input connector
24-VDC control power supply cable
I/O signal connection cable
CN901: I/O signal connector between the SERVOPACK and converter
Cable Length
0.4 m
0.4 m
M-II
M-II
Description
This cable connects the CN901 connectors on
the SERVOPACK and converter.
This cable connects the CN103(CN104) con-
nectors on the SERVOPACK and converter.