Connecting The Converter To The Servopack; Connecting The Connectors; Interconnecting Terminals - YASKAWA Sigma-V Series User Manual

3.2

Connecting the Converter to the SERVOPACK

3.2.1 Connecting the Connectors

Connect CN901 and CN103 on the SERVOPACK and converter as shown in the following figure.
Converter
Cable Name
IO signal connection cable JZSP-CVI02-A4-E
24-VDC control power
supply cable

3.2.2 Interconnecting Terminals

Use the busbars that are provided with the converter to connect the P and N terminals between the SERVO-
PACK and the converter.
The busbars are different for different converter models.
(1) SGDV-COA2BAA, -COA3ZDA Converters
Attach the busbars as shown in the following figure.
Note: The shapes of the ends of the busbars are different for the SERVOPACK and converter connections and for the P ter-
minal and N terminal connections.
SERVOPACK
CN103: Control power supply input connector
24-VDC control power supply cable
I/O signal connection cable
CN901: I/O signal connector between the SERVOPACK and converter
Cable Model
JZSP-CVG00-A4-E

3.2 Connecting the Converter to the SERVOPACK

Cable Length
This cable connects the CN901 connectors on
0.4 m
the SERVOPACK and converter.
This cable connects the CN103(CN104) con-
0.4 m
nectors on the SERVOPACK and converter.
Analog
Description
3
3-21