Servopack Part Names - YASKAWA JUSP-MD D01A Series User Manual

1 Outline

1.3.2 SERVOPACK Part Names

No.
Rotary switch (S1001)
DIP switch (S1002)
MS1 LED indicator
MMA, MM2, MM3, and MM4
LED indicators
Panel operator keys
Ground terminal
1.3.2

SERVOPACK Part Names

This section describes the part names of SERVOPACKs.
Use a SERVOPACK together with a converter. For details, refer to 1.7 Combinations for Multi-Winding Drive
Systems.
Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the front
cover attached when using the SERVOPACK.
M-II
No.
 DIP switch (S3)
Rotary switch (S2)

Power LED indicator

(POWER)
 CN5 connector
1-4
Name
With plastic cover open
Name
Description
Do not use this switch.
Do not use this switch.
This indicator cannot be used.
Lights green when local communications are
ready.
Used to set parameters.
Used to protect against electrical shock.
Be sure to ground this terminal.
Description
Do not use this switch.
Do not use this switch.
Indicates that the control power is being supplied
(green).
Do not use this connector.
(cont'd)
Reference
–
–
–
–
2.1 Overview
3.1 Main Circuit Wiring
Reference
–
–
–
–