YASKAWA JUSP-MD D01A Series User Manual page 264

(3) Operating Procedure
Use the following procedure to perform the gain adjustment of analog monitor output.
Display after
Step
Operation
1
2
3
4
5
6
7
8
9
10
7.9 Gain Adjustment of Analog Monitor Output (Fn00D)
Keys
Press the MODE/SET Key to select the utility function.
MODE/SET DATA/
Press the UP or DOWN Key to select Fn00D.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one second.
The screen shown on the left will be displayed.
MODE/SET DATA/
Press the DATA/SHIFT Key. Gain adjustment data will be
displayed as shown on the left.
MODE/SET DATA/
Press the UP or DOWN Key to change the gain.
MODE/SET DATA/
Press the DATA/SHIFT Key to return to the screen as
shown on the left.
MODE/SET DATA/
Press the MODE/SET Key to switch to channel 2 (analog
monitor 2) monitor output.
MODE/SET DATA/
Press the DATA/SHIFT Key. Gain adjustment data will be
displayed as shown on the left.
MODE/SET DATA/
Press the UP or DOWN Key to change the gain.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one second.
"Ch2-G" is displayed, and then "Fn00D" is displayed again.
MODE/SET DATA/
Operation
7
7-17