Part Names; Multi-Winding Drive Unit Part Names - YASKAWA JUSP-MD D01A Series User Manual

1.3

Part Names

1.3.1 Multi-Winding Drive Unit Part Names

The part names of the multi-winding drive unit are given below.
No.
Control power supply input
 connectors (CN7A and
CN7B)
 Panel display
Personal computer connec-

tor (CN4)
Digital operator connector

(CN54)
Connectors

(CN9A and CN9B)
Connector for I/O signals

(CN1)
 Encoder connector (CN21)
 CN22 connector
CN3 connector

Local communications con-

nectors (CN41A and CN41B)
Nameplate
Model number
Name
CN7A is the 24 VDC (±15%) input connector.
CN7B takes the same input, but it is normally not
necessary to connect it.
Shows the status of the multi-winding drive sys-
tem with a seven-segment LED display.
A USB connector used to connect a personal com-
puter. Use the special personal computer cable to
make the connection.
Used to connect to a digital operator or personal
computer (RS422).
Do not connect anything to these connectors.
Used to connect sequence I/O signals.
Connects to the encoder cable.
Do not connect anything to this connector.
Do not connect anything to this connector.
Used to connect the SERVOPACKs.
Gives the product model number and ratings. It is
attached to the side of the unit.
Gives the model number of the multi-winding
drive unit.
Description

1.3 Part Names

Reference
–
–
–
–
–
–
–
–
–
–
–
–
1
1-3