YASKAWA JUSP-MD D01A Series User Manual page 190

5 Operation
5.11.1 Hard Wire Base Block (HWBB) Function
(9) Dynamic Brake
If the dynamic brake is enabled in Pn001.0 (Stopping Method for Servomotor after /S-ON Signal is Turned
OFF), the servomotor will come to a stop under the control of the dynamic brake when the HWBB function
works while the /HWBB1 or /HWBB2 signal is OFF.
• The dynamic brake is not a safety-related part of a control system. Be sure to design the system so that
the system will not be put into danger if the servomotor coasts to a stop in the HWBB state. Usually, use a
sequence in which the HWBB state occurs after the servomotor is stopped using the reference.
• If the application frequently uses the HWBB function, do not use the dynamic brake to stop the servomo-
tor. Otherwise element deterioration in the SERVOPACK and converter may result. To prevent internal ele-
ments from deteriorating, use a sequence in which the HWBB state occurs after the servomotor has come
to a stop.
(10) Position Error Clear Setting
A position error in the HWBB state is cleared according to the setting in Pn200.2 for the clear operation selec-
tion.
If Pn200.2 is set to 1 (i.e., the position error is not cleared for position control), the position errors will be
accumulated unless the position reference from the host controller is canceled in the HWBB state, and the fol-
lowing conditions may result.
• A position error overflow alarm (A.d00) occurs.
• If the servo is turned ON after changing from HWBB state to BB state, the servomotor will move for the
accumulated position error.
Therefore, stop the position reference through the host controller while in HWBB state. If Pn200.2 is set to 1
(i.e., the position error is not cleared), input the clear (CLR) signal while in HWBB or BB state to clear the
position error.
(11) Servo Alarm Output Signal (ALM) and Alarm Code Output Signals (ALO1, ALO2,
and ALO3)
In the HWBB state, the servo alarm output signal (ALM) and alarm code output signals (AOL1, AOL2, and
AOL3) are not sent.
5-82
CAUTION