Connecting A Reactor For Harmonic Suppression - YASKAWA JUSP-MD D01A Series User Manual

3 Wiring and Connection

3.10.3 Connecting a Reactor for Harmonic Suppression

3.10.3 Connecting a Reactor for Harmonic Suppression

The converters have reactor connection terminals for power supply harmonic suppression that can be used as
required.
Connect a reactor as shown in the following figure.
Note 1. Connection terminals for DC reactor
2. Reactors are not included. (Sold separately.)
3. The multi-winding drive unit and SERVOPACKs do not have connection terminals for reactors.
3-52
DC Reactor
Converter
DC reactor
1
2
short-circuit, and connect a DC reactor.
AC Reactor
AC reactor
U
400-VAC
V
power
supply W
1 and 2 are short-circuited at shipment. Remove the lead wire for
Converter
X
L1
Y
L2
Z
L3