Viewing Monitor Displays - YASKAWA JUSP-MD D01A Series User Manual

8.2

Viewing Monitor Displays

The example below shows how to view the contents of monitor number Un000 (when the servomotor rotates
-1
at 1500 min ).
Display after
Step
Operation
1
2
3
4
Keys
Press the MODE/SET Key to select the monitor display.
MODE/SET DATA/
If Un000 is not displayed, press the UP or DOWN Key to
select Un000.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond to display the motor rotating speed (Un000).
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond to return to the display of step 1.
MODE/SET DATA/

8.2 Viewing Monitor Displays

Operation
8
8-3