Wall Mounting A Keyset; Wall Mounting A Keyset On A Standard Wall Plate - NEC DSX-160 Hardware Manual

Wall Mounting a Keyset

Wall Mounting a Keyset on a Standard Wall Plate

To mount the telephone on the standard wall plate:
1. Locate and wire a standard wall plate in a convenient location.
Fold the telephone legs into the wall mount position.
2.
3. Make sure the handset coil cord is routed through the lower channel in the base.
4. Fold the two leg supports down flush with the legs.
5. Plug a short line cord into the telephone base.
Plug the other end of the short line cord into the wall plate.
6.
7. Place the telephone on top of the wall plate and slide into place.
5
DSX-80/160 Hardware Manual
4
Figure 50: Mounting the Telephone to a Standard Wall Plate
4
2
3
Wall Mounting
1
7
6
7
Optional Equipment ◆ 65