Options And Peripheral Equipment - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

9. OPTIONS AND PERIPHERAL EQUIPMENT

9. OPTIONS AND PERIPHERAL EQUIPMENT
WARNING
CAUTION
The following items are the same as MR-J4-_A_-RJ servo amplifiers. For details, refer to each section
indicated in the detailed explanation field. "MR-J4-_A_" means "MR-J4-_A_(-RJ) Servo Amplifier Instruction
Manual".
Cable/connector sets
Regenerative option
FR-BU2- (H) brake unit
FR-RC-(H) power regeneration converter
FR-CV-(H) power regeneration common converter
Junction terminal block MR-TB50 (recommended)
MR Configurator2
Battery
Selection example of wires
Molded-case circuit breakers, fuses, magnetic contactors
Power factor improving DC reactor
Power factor improving AC reactor
Relay (recommended)
Noise reduction techniques
Earth-leakage current breaker
EMC filter (recommended)
External dynamic brake
Panel through attachment (MR-J4ACN15K/MR-J3ACN)
Circuit protector
Before connecting any option or peripheral equipment, turn off the power and wait
for 15 minutes or more until the charge lamp turns off. Then, confirm that the
voltage between P+ and N- is safe with a voltage tester and others. Otherwise, an
electric shock may occur. In addition, when confirming whether the charge lamp is
off or not, always confirm it from the front of the servo amplifier.
Use the specified peripheral equipment and options to prevent a malfunction or a
fire.
Item
www.kavrammuhendislik.com.tr
Detailed explanation
MR-J4-_A_-RJ 100 W or
more
MR-J4-_A_ section 11.1
MR-J4-_A_ section 11.2
MR-J4-_A_ section 11.3
MR-J4-_A_ section 11.4
MR-J4-_A_ section 11.5
MR-J4-_A_ section 11.6
MR-J4-_A_ section 11.7
MR-J4-_A_ section 11.8
MR-J4-_A_ section 11.9
MR-J4-_A_ section 11.10
MR-J4-_A_ section 11.11
MR-J4-_A_ section 11.12
MR-J4-_A_ section 11.13
MR-J4-_A_ section 11.14
MR-J4-_A_ section 11.15
MR-J4-_A_ section 11.16
MR-J4-_A_ section 11.17
MR-J4-_A_ section 11.18
9 - 1
MR-J4-03A6-RJ
MR-J4-_A_ section 18.8.1
MR-J4-_A_ section 18.8.3
MR-J4-_A_ section 18.8.4