Mitsubishi Electric MELSERVO-J4 Series Instruction Manual page 559

12. APPLICATION OF FUNCTIONS
No./symbol/na Setting
me digit
6 This is enabled when [Cam control data No. 3] is set to "1". Set the initial value of
the cam standard position in the output axis position unit.
*CIBSS
The unit will be changed to [μm], 10
Cam
of [Pr. PT01].
standard
position
(initial setting
value) Setting range: -999999 to 999999
7 Set the position to start the search processing to restore the cam axis one cycle
current value. Set this item when restoring the position of the return path with the to-
*CICYS
and-fro control cam pattern.
Cam axis one
When [Cam control data No. 30] is set to "1"
cycle current
The unit will be changed to [μm], 10
value (initial
setting of [Pr. PT01].
setting value)
When [Cam control data No. 30] is set to "2"
The unit will be changed to [μm], 10
setting of [Cam control data No. 14].
Setting range: 0 to [Cam control data No. 48] - 1
14 _ _ _ x Control unit
*ETYP 0: mm
Synchronous 1: inch
encoder axis
2: degree
unit
3: pulse
_ _ x _ Feed length multiplication
0: × 1
1: × 10
2: × 100
3: × 1000
This digit is disabled when [Cam control data No. 14] is set to "_ _ _ 2" or "_ _ _ 3".
_ x _ _ For manufacturer setting
x _ _ _
15 Set a numerator used to convert encoder pulses of the synchronous encoder axis
into the synchronous encoder axis unit.
*ECMX
Set the numerator within the following range.
Synchronous
encoder axis
1
unit
conversion:
16000
Numerator
Setting a value out of the range will trigger [AL. F6 Cam control warning].
When "0" is set, handle the numerator in the same way as when "1" is set.
Setting range: 0 to 16777215
16 Set a denominator used to convert encoder pulses of the synchronous encoder axis
into the synchronous encoder axis unit.
*ECDV
Set a value within the range of [Cam control data No. 15].
Synchronous
Setting a value out of the range will trigger [AL. F6 Cam control warning].
encoder axis
When "0" is set, handle the denominator in the same way as when "1" is set.
unit
conversion:
Denominator Setting range: 0 to 16777215
30 Select an input axis of the main shaft input.
*MAX 0: Disabled
Main shaft 1: Servo input axis
input axis
2: Synchronous encoder axis
selection
Function
-4
[inch], 10
-4
-4
ECMX
≤ ≤ 6000
ECDV
12 - 18
www.kavrammuhendislik.com.tr
-3
[degree], or [pulse] with the setting
-3
[inch], 10 [degree], or [pulse] with the
-3
[inch], 10 [degree], or [pulse] with the
Control
mode
Initial
value
[unit]
0
Refer to
Function
column
for unit.
0
Refer to
Function
column
for unit.
0h
0h
0h
0h
0
0
0