11. MR-D01 EXTENSION I/O UNIT
11.4 Installation direction and clearances
CAUTION
(1) Installation clearances of the servo amplifier
(a) Installation of one servo amplifier
Cabinet
40 mm
or more
Servo
amplifier
10 mm
or more
(Note 2)
40 mm
or more
(Note 1)
Note 1. For the 11 kW to 22 kW servo amplifiers, the clearance between the bottom and the ground will be 120 mm or more.
2. When mounting MR-J4-500A-RJ, maintain a minimum clearance of 25 mm on the left side.
The equipment must be installed in the specified direction. Otherwise, it may
cause malfunction.
Leave specified clearances between the servo amplifier and cabinet walls or other
equipment. Otherwise, it may cause malfunction.
10 mm
or more
11 - 11
www.kavrammuhendislik.com.tr
Cabinet
Wiring allowance
80 mm or more
Top
Bottom