Options And Auxiliary Equipment; Cable/Connector Sets; Combinations Of Cable/Connector Sets - Mitsubishi Electric MELSERVO MR-J3-xT Instruction Manual

14. OPTIONS AND AUXILIARY EQUIPMENT

14. OPTIONS AND AUXILIARY EQUIPMENT
WARNING
CAUTION

14.1 Cable/connector sets

As the cables and connectors used with this servo, purchase the options indicated in this section.

14.1.1 Combinations of cable/connector sets

Note
Battery unit
MR-J3BAT
To next page a)
Note. Connectors for 3.5kw or less. For 5kw or more, terminal blocks.
Before connecting any option or auxiliary equipment, make sure that the charge
lamp is off more than 15 minutes after power-off, then confirm the voltage with a
tester or the like. Otherwise, you may get an electric shock.
Use the specified auxiliary equipment and options. Unspecified ones may lead to a
fault or fire.
33)
Servo amplifier
1) 2)
CN5
CNP1
CN3
CN1
CNP2
CN6
CNP3
CN2
CN4
31)
To next page b)
32)
Direct connection type (cable length 10m or less, IP65)
15) 16) 17) 18)
Junction type (cable length more than 10m, IP20)
21) 22)
To 24VDC power
supply for
electromagnetic
brake
14 - 1
Personal computer
19) 20)
23)
13) 14)
9) 10) 11) 12)
7) 8)
3) 4) 5) 6)
Power supply
Brake
connector
connector
Serevo
motor
HF-MP
HF-KP
Encoder
connector