Mr-J4-03A6-Rj; Display Flowchart - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

3. DISPLAY AND OPERATION SECTIONS

3.2 MR-J4-03A6-RJ

3.2.1 Display flowchart

Press the "MODE" button once to shift to the next display mode. Refer to section 3.2.2 and later for the
description of the corresponding display mode.
Display mode transition
Status display
One-touch tuning
Diagnosis
Alarm
Point table setting
Basic setting
Button
parameters
MODE
Gain/filter
parameters
Extension setting
parameters
I/O setting
parameters
Extension setting 2
parameters
Extension setting 3
parameters
Option setting
parameters
Positioning control
parameters
Note. When the axis name is set to the servo amplifier using MR Configurator2, the servo status is displayed after the axis name is
displayed.
Initial screen
Servo status display.
For the point table method and program
method, "PSL" is displayed at power-on.
For the indexer method, "CL" is displayed.
(Note)
One-touch tuning
Select this when performing the one-touch
tuning.
Sequence display, drive recorder
enabled/disabled display, external I/O signal
display, output signal (DO) forced output, test
operation, software version display, VC
automatic offset, servo motor series ID
display, servo motor type ID display, servo
motor encoder ID display, teaching function
Current alarm display, alarm history display,
and parameter error No./point table error No.
display
Display and setting of point table data.
This is displayed only in the point table
method, not in other control modes.
Display and setting of basic setting
parameters.
Display and setting of gain/filter parameters.
Display and setting of extension setting
parameters.
Display and setting of I/O setting parameters.
Display and setting of extension setting 2
parameters.
Display and setting of extension setting 3
parameters.
Display and setting of option setting
parameters.
Display and setting of positioning control
parameters.
3 - 28
www.kavrammuhendislik.com.tr
Function Reference
MR-J4-_A_(-
Instruction
section 6.2
Section 18.5.4
Section
3.1.2
RJ) Servo
Amplifier
Manual
Section
3.2.3
Section
3.2.4
Section
3.2.5
Section
3.2.6