12. APPLICATION OF FUNCTIONS
(2) Example of the simultaneous start function with contact input or via the Modbus-RTU communication
(a) Configuration example
To synchronize the vertical motion of the vertical axis (axis 2) with the position of the horizontal axis
(axis 1) as shown below, input the positioning commands for axis 1 to axis 2 as well. (Set the same
point table data for the axis 1 and 2.)
Axis 2 (vertical axis)
Flow of belt conveyors
Fig. 12.1.5 System configuration example
12 - 34
www.kavrammuhendislik.com.tr
Axis 1 (horizontal axis)