Options And Peripheral Equipment - Mitsubishi Electric MR-J4W2 Instruction Manual

18. MR-J4W2-0303B6 SERVO AMPLIFIER

18.8 Options and peripheral equipment

WARNING
CAUTION
The items in the following table are the same as those for MR-J4W2-_B and MR-J4W3-_B servo amplifiers.
Refer to the section of the detailed explanation field for details.
Before connecting options and peripheral equipment, turn off the power and wait
until the charge lamp turns off. Otherwise, an electric shock may occur. In
addition, when confirming whether the charge lamp is off or not, always confirm it
from the front of the servo amplifier.
Use the specified peripheral equipment and options to prevent a malfunction or a
fire.
POINT
We recommend using HIV wires to wire the servo amplifiers, options, and
peripheral equipment. Therefore, the recommended wire sizes may differ from
those used for the previous servo amplifiers.
SSCNET III cable
Battery
MR Configurator2
Relay (recommended)
Noise reduction techniques
Junction terminal block MR-TB26A
Item
18 - 50
Detailed explanation
Section 11.1.2
Section 11.3
Section 11.4
Section 11.8
Section 11.9
Section 11.12