Cam Position Compensation Target Position - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

12. APPLICATION OF FUNCTIONS

12.1.15 Cam position compensation target position

Perform compensation to match the cam axis one cycle current value with the cam position compensation
target position ([Cam control parameter No. 60]) by inputting a cam position compensation request.
C_CPCD
(Cam position compensation
request)
Cam axis one cycle
current value
Cam feed current value
12 - 51
www.kavrammuhendislik.com.tr
Cam position compensation
target position
After compensation
Before compensation