Point Table Setting - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

3. DISPLAY AND OPERATION SECTIONS

3.2.5 Point table setting

You can set the target position, servo motor speed, acceleration time constant, deceleration time constant,
dwell, auxiliary function and M code.
(1) Display transition
Point table transition
Point table No. 1
Point table No. 2
Point table No. 3
Point table No. 98
Point table No. 99
POINT
Point table No. 1 to No. 99 can be set with the operation section of the servo
amplifier. To set point table No. 100 to No. 255, use MR Configurator2.
SET button
UP
DOWN
MODE button
3 - 40
www.kavrammuhendislik.com.tr
Setting item transition
Target position
Servo motor speed
Acceleration time constant
Deceleration time constant
Dwell
Auxiliary function
M code
UP
DOWN