2. SIGNALS AND WIRING
2.2 Connectors and pin assignment
POINT
The pin assignment of the connectors is as viewed from the cable connector
wiring section.
For the STO I/O signal connector (CN8), refer to chapter 13 of "MR-J4-_A_(-RJ)
Servo Amplifier Instruction Manual".
For the CN1 connector, securely connect the external conductor of the shielded
cable to the ground plate and fix it to the connector shell.
PP (CN1-10 pin) /NP (CN1-35 pin) and PP2 (CN1-37 pin) /NP2 (CN1-38 pin)
are exclusive. They cannot be used together.
2 - 15
www.kavrammuhendislik.com.tr
Screw
Cable
Screw
Ground plate