Figure 4-17 Installing The Gpz-4Lca/Gpz-8Lce Daughter Board - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 4-17 Installing the GPZ-4LCA/GPZ-8LCE Daughter Board

GPZ-4LCA/GPZ-8LCE (4-Port/8-Port SLI Daughter Board)

The GPZ-4LCA and GPZ-8LCE daughter boards are mounted on the

GCD-4LCA/GCD-8LCA. These boards provide:

4-Port Single Line and 8-Port Single Line analog extension ports

(used for on-premise analog telephones, fax machines, and analog

The GCD-4LCA/GCD-8LCA is not rated for OPX use. A

GCD-4DIOPA blade should be used instead (it supports the analog

DID and single line telephone interface functions, such as Off-

Premise Extensions).

Connector for GCD-4LCA and GCD-8LCA Blades

Ring Generator

Caller ID Sending Ability

Message Wait Lamp Ability (Controlling Voltage:-110Vdc) for all ports

Constant current type battery feeding (25mA / -28Vdc)

Feeding Polarity Reverse Ability

Installing the SV9100 Blades

Table of Contents