NEC Univerge SV9100 System Hardware Manual page 452

5-84
5.2.7.3 Configuring the Digital Telephone for the Ten Key Kit
1. With the telephone not plugged in and the handset on-hook,
press the 4 and 6 buttons on the numbered keypad and
connect the telephone cable.

2. Press 2 on the numbered keypad to enter the Button Kit
mode.

3. Follow the directions below for the type of keypad installed:
Table 5-17 Numbered Keypad Type
Numbered Keypad Type
Japan Value
Model A Telephone
Model B UX5000 Telephone
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Economy
Model A Economy
Model B Economy
Reserve
4. Press line key 2, 8, 14 or 20 to save to memory. The display
changes back to the Service Class R/W mode and the Red
Message Waiting (MW) LED is On.
5. Press Exit to return the telephone to idle.
5.2.7.4 Configuring the IP Telephone for the Ten Key Kit
1. Press Menu, then 0 (Config) to enter the terminal program
mode.
2. At the Login screen, enter the user name (default = ADMIN)
and password (default = 6633222) and press the OK
Softkey.
3. Press 3 for Maintenance Setting.
4. Press 4 for Adjust.
5. Press 2 for Key Kit Type.
Installing DT Series Digital and IP Multiline Terminals
This places the telephone into Service Class Read/
Write (R/W) mode. The Message Waiting LED should
be On.
The Message Waiting LED should flash.
Push
(2D Style Terminal)
01 Line 1 LED on Red
02 Line 2 LED on Red
03 Line 1 and 2 LED on Red
04 Line 1 LED on Green
05 Line 2 LED on Green
06 Line 1 and 2 LED on Green
07 Line 1 LED flashing Red
08
Line 2 LED flashing Red
09 Line 1 and 2 LED flashing Red
10 Line 1 LED flashing Green
11 Line 2 LED flashing Green
12 Line 1 and 2 LED flashing Green
Issue 3.0
LED Indication