Table of Contents
Advertisement
Chapter 2 Preparations
Installing PCI board in the primary riser slot 1/2
The primary riser card (butterfly riser card) supports slot 1 (for full height PCI board) and slot 2 (for low profile
PCI board).
Please prepare T-10 hexalobular driver before installation.
Follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Pick up the both end part of the primary riser card and lift them up to remove.
4.
See supported PCI boards and mountable slots and confirm the installation location.
102
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
