Figure 3-94 Install Additional Brackets From Chs2Ug Joint Bracket Kit - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual

Figure 3-94 Install Additional Brackets from CHS2UG JOINT BRACKET KIT

4. Using supplied screws, secure the CHS2UG STAND KIT (K) to the
floor (refer to
JOINT BRACKET
WARNING
5. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-19
grounding the system.
6. Refer to 3.3.5 Install AC Power Cords on 19" Chassis on page 3-20
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-4
blades.
Figure 3-94 Install Additional Brackets from CHS2UG
KIT).
To prevent possible damage to the 19" chassis due to
falling, NEC recommends screws be installed in the
stand mount brackets as soon as possible.
Metal
Brackets
3.3.3 Install
for complete details on
2.1
for installation of
3-77
to