NEC Univerge SV9100 System Hardware Manual page 679

Issue 3.0
13.3 ADA-L UNIT
SV9100 System Hardware Manual
Using the ADA-L UNIT (Ancillary Device Adapter) provides a recording jack
connection from a telephone to an external tape recorder, speaker or PC. Both
sides of the conversation are recorded. The adapter output is a 1/8" audio
(stereo) jack which you can connect directly to an AUX level input on a recorder or
page amplifier.
Recording a conversation (Handset/Headset/Hands-free), or sending recorded
calls to a telephone are possible by connecting a cassette recorder to the ADA-L
UNIT (voice recording and the playback of a recorded sound from a cassette
recorder cannot occur at the same time).
Before installing or removing the adapters,
.
from the system
Be sure the connected audio device provides a standard AUX level input.
The use of monitoring, recording, or listening devices to eavesdrop,
CAUTION
monitor, retrieve, or record telephone conversation or other sound
activities, whether or not contemporaneous with transmission, may be
illegal in certain circumstances under federal or state laws. Legal advice
should be sought prior to implementing any practice that monitors or
records any telephone conversation. Some federal and state laws require
some form of notification to all parties to a telephone conversation, such
as using a beep tone or other notification methods or requiring the
consent of all parties to the telephone conversation, prior to monitoring or
recording the telephone conversation. Some of these laws incorporate
strict penalties.
The handset records only when a call is placed or answered.
13.3.1 ADA-L UNIT Switch Settings
Figure 9-104 ADA-L UNIT
switches (DSW) allow a technician to configure the unit for specific settings.
TIP
Figure 9-104 ADA-L UNIT
the multiline terminal should be unplugged
shows the location of the switches. The dip
Due to the location of the switches, set switches prior to
installation of ADA-L UNIT on DTL/ITL multiline terminal.
9-123