Figure 6-12 Placing The Telephone Cords Inside The Wall Mount Stand; Figure 6-13 Attaching The Wall Mount Unit To The Wall - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual

Figure 6-12 Placing the Telephone Cords Inside the Wall Mount Stand

5. Place the base unit on the posts of the wall screws and push down until it is
firmly seated.

Figure 6-13 Attaching the Wall Mount Unit to the Wall

6. Plug the other end of the short telephone cord into a telephone wall jack.
7. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
6-10 Plugging the AC Adapter into the AC Wall Outlet on page
Do not use an outlet controlled by a wall switch.
NOTE
Figure
6-7.
6-9