Figure 5-51 Bundling The Line Cord; Figure 5-52 Plugging In Line Cord - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
4.7.1.2 Wall Mounting the Multiline Terminal
1. Plug line cord in the wall receptacle. Leave about eight
inches of cord and bundle the rest as shown in
Bundling the Line

Figure 5-51 Bundling the Line Cord

2. Ensure the Tilt Legs are in the flat (unused position).
3. Plug the line cord into the multiline terminal as illustrated in
Figure 5-52 Plugging in Line

Figure 5-52 Plugging in Line Cord

4. Align the two holes on the back of the multiline terminal with
the two screws on the wall plate and slide downward (refer
to Figure 5-53 Mount Multiline Terminal Wall on Wall Plate
on page
Cord.
Cord.
5-58).
Figure 5-51
5-57