Figure 3-110 Secure Cable In Support Bracket; Figure 3-111 Installing Cable Support Guide - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
5. Using tie wraps, secure CHS2U BATT CABLE INT in cable guide
bracket.

Figure 3-110 Secure Cable in Support Bracket

6. With supplied screw, install cable guide in chassis.

Figure 3-111 Installing Cable Support Guide

7. Install two 2.3 AH-12V batteries (locally procured) into the CHS2UG
BATT MTG KIT (refer to
3-90).
The first battery must be installed on the left side, then slid to the
right due to an installation tab on the mounting kit.
TIP
Figure 3-112 Installing Two Batteries on page
3-89