NEC Univerge SV9100 System Hardware Manual page 600

Hide thumbs Also See for Univerge SV9100:

Table of Contents

11.5.3 Connectors

The NEC 4-Port Digital Call Logging Unit USB recording device has four

connectors and four LED indicators:

One PC USB connector, from which the device derives its power and

streams all speech and control channel information up to the host PC

and NEC BackOffice application.

Four Digital Phone line connectors that passively tap across the NEC

digital port and listen in high impedance mode to the signaling

on the line. The NEC 4-Port Digital Call Logging Unit does not affect

the telephone operation in any way with or without connection of the

11.5.4 Package Contents

The 4-Port Digital Call Logging Unit is packaged with everything necessary

for installation including:

Quick-start installation manual

11.5.5 Hardware and Software Requirements

4-Port Digital Call Logging Unit:

Windows XP, Windows 2000 Professional SP4 or 2003.

One USB Controller Card for each four devices – powered USB

hubs can be used however, no more than four devices should be

connected to a USB Controller Card.

An available PCI slot for each USB Controller Card.

LAN connection for remote access to stored calls.

NEC BackOffice Recorder software.

4 equipped with:

Calls should be stored on the same host PC.

Using the GSM 6.10 Compression option, each 1Gb

of Hard Disk storage allows recording of about 168

hours of calls.

Installing SV9100 Optional Equipment

Chapters

Table of Contents