Figure 3-68 Install Support Bracket (Base And Expansion Chassis) - NEC Univerge SV9100 System Hardware Manual

3-56
5. Turn the support 90° and install the M4 x 8 screws
previously removed.

Figure 3-68 Install Support Bracket (Base and Expansion Chassis)

6. Attach the MV bracket (upper and lower) to the 9.5 inch
Base and Expansion chassis. Refer to section
1 – Wall Mounting the 9.5 inch Base (CHS2UG B-US)
Chassis steps 4 through 14 for bracket installation.
Or
Issue 3.0
4.2.1 Option
Installing the SV9100 Chassis