Figure 5-81 Attaching Directory Card To Directory Card Holder; Figure 5-82 Attaching Directory Card Holder To The Multiline Terminal - NEC Univerge SV9100 System Hardware Manual

5-78

Figure 5-81 Attaching Directory Card to Directory Card Holder

Directory Card
2. Locate the two grooves on the top of the telephone as illustrated in
Figure 5-82 Attaching Directory Card Holder to the Multiline
Push the directory card holder into the grooves on the multiline
terminal until they snap into place.
To remove the directory card, press the two sides of the directory

card holder inward until the tabs release and pull the holder out of
the grooves.

Figure 5-82 Attaching Directory Card Holder to the Multiline Terminal

Installing DT Series Digital and IP Multiline Terminals
Issue 3.0
Directory Card
Holder
Terminal.