Figure 3-50 Secure Metal Fitting To Lower Wall Mount Bracket With Screws - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Using two screws, secure the metal fitting to the lower wall mount

bracket. Refer to

Figure 3-50 Secure Metal Fitting to Lower Wall

Mount Bracket with Screws

Figure 3-50 Secure Metal Fitting to Lower Wall Mount Bracket with Screws

Attach the supplied cable support bracket to either end of the lower

wall mount bracket with a single screw (refer to

Cable Support Bracket to Lower Wall Mount Bracket on page

for screw location.

Figure 3-51 Attach

Table of Contents