9-128
2.
Using the mini-plug connection cord, connect the ADA-L
Unit IN jack to the cassette recorder EAR PHONE jack
(Refer to
Figure 9-109 ADA-L IN Jack Connection
13.3.3.3
Send a Startup (REMOTE) Signal to the Recorder
1.
Using a Phillips screwdriver, remove the screw from the
ADA-L UNIT. Solder the cable to the T1 and T2 contacts on
the internal board (refer to
Points).
IMPORTANT
2.
Run the cable out of the opening of the ADA-L UNIT (refer to
Figure 9-111 ADA-L Cable
IMPORTANT
Figure 9-109 ADA-L IN Jack
Figure 9-110 ADA-L Solder
Ensure solder does not adhere to
❍
surrounding parts.
Remove any solder waste from the board.
❍
Figure 9-110 ADA-L Solder Points
Opening).
DSW 4 must be set to ON.
❍
This function is not supported on some
❍
recorders.
Installing SV9100 Optional Equipment
Issue 3.0
Connection).