Figure 3-98 Attaching The Second Stand Unit Bracket; Figure 3-99 Installing The Support Bracket - NEC Univerge SV9100 System Hardware Manual

3-80
4. Install tab slots J, K, L, M, N and O of the remaining bracket on tabs j, k, l,
m, n and o on the opposite side of the stand unit.

Figure 3-98 Attaching the Second Stand Unit Bracket

5. Align the support bracket with holes P and Q on the stand unit brackets and
secure using the two M3 x 8 screws provided.

Figure 3-99 Installing the Support Bracket

Issue 3.0
Installing the SV9100 Chassis