Figure 9-38 Enter Line Details Dialog Box - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 9-38 Enter Line Details Dialog Box

Name the device (user or extension name).

Click on the Browse button to identify the storage location

for the device.

It is recommended that you create a Master Calls folder with

a subfolder for each device. This makes it easier to search

for archived calls. You should also boost the remote signal

and check for quality with a test call.

Audio Balance – allows you to increase or decrease the

audio balance of the recording. Leaving Local and Remote

at 100% leaves the recording as-is. Perhaps boosting the

remote side on most installs to 150% is suggested, but test it

prior to leaving this setting as-is.

Ignore Calls – although the Recorder Starts recording

automatically, this setting tells the system only to Save calls

longer than this preset threshold.

Automatically Erase Calls – this can be set to delete calls

after x number of days or after a defined disk space is used.

Calls marked Important during playback are not

automatically deleted.

Press OK to save the settings.

Installing SV9100 Optional Equipment

Table of Contents