Figure 9-1 Pgd(2)-U10 Adp; Table 9-1 Pgd(2)-U10 Adp Led Indications - NEC Univerge SV9100 System Hardware Manual

2.2
2.3
9-2
The PGD(2)-U10 ADP connects to any available digital extension port. The
terminal connections made in the PGD(2)-U10 ADP and the jumper settings
determine what features are used for each circuit.

Figure 9-1 PGD(2)-U10 ADP

Channel 1
Status LED
LED Indications

Table 9-1 PGD(2)-U10 ADP LED Indications

provides a brief description of each.
Table 9-1 PGD(2)-U10 ADP LED Indications
LED Indication
LED 1 Green LED when
CH1 in use.
LED 2 Green LED when
CH2 in use.
Setting up PGD(2)-U10 ADP Connections
This sections provides instructions for setting up the PGD(2)-U10 ADP
connections.
If the PGD(2)-U10 ADP is to be wall mounted, all the cable
❍
connections should be made first.
CAUTION
For the module to ID correctly after setting the jumpers, set the circuit
❍
type to 0 for the module port in Program 10-03-01 prior to connecting
the line cord to the PGD(2)-U10 ADP.
Channel 2
Status LED
lists the LED indications and
Note
Flashing green LED indicates DIP Switch setting
and programming for CH1 are conflicting.
Flashing green LED indicates DIP Switch setting
and programming for CH2 are conflicting.
Installing SV9100 Optional Equipment
Issue 3.0