Chapter 3 Installing The Sv9100 Chassis; General Information; Site Preparation And Mdf/Idf Construction; Precautionary Information - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Installing the SV9100 Chassis

This chapter contains information to help the technician install the chassis for the

SV9100 system. The technician should be familiar with this section before installing

any equipment.

Pre-installation planning is essential. Advanced planning minimizes installation time,

cost, and disruption of the customer business activities.

SV9100 System Hardware Manual

REPARATION AND

Observe the following warnings during installation.

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

Never touch uninsulated telephone wires or terminals unless the telephone line

is disconnected at the network interface.

Use caution when installing or modifying telephone lines.

To avoid shock or equipment damage, do not plug in or turn the system power

on before completing the installation process.

Avoid working with the equipment during electrical storms.

Use only commercial AC power to prevent shock or fire.

Use the power cord supplied for the chassis.

To prevent overheating, do not bundle AC power cords together.

Make sure the chassis has a proper earth ground.

Install batteries with the correct polarity to prevent damaging equipment.

To avoid damage, the chassis should not be placed on unstable surfaces.

Chapters

Table of Contents