Figure 9-102 In-Line Power Adapter Switch Settings - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
When using center feed, set the SW1 switch located on the back of the
adapter as follows:

Figure 9-102 In-Line Power Adapter Switch Settings

IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 200/24 Switch
13.2.2 Installation
1. Set the SW1 switch on the ILPA-R adapter to the correct setting for
the Ethernet switch to which it is to be connected.
2. Set the switch setting on the NEC IPhone or IP adapter to the correct
position.
NEC Power Patch Panel
(12-port NEC SN1604 PWRMS,
8SHUBU Blade
Cisco Catalyst Power Patch Panel
Cisco Catalyst PRW Series
Center Feed Hub System
Center Feed Hub System
IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 200/24 Switch
IPhone (SW2) or IP Adapter (SW1)
24-port NEC BlueFire 200/24)
SW1 Setting
1
1
2
SW1 Setting
1
1
2
SW Setting
1
2
9-121