Figure 3-107 Removing Battery Access Panel - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
S 8 B
ECTION ATTERY
Two types of battery connection provide battery life during a power failure, the
internal battery and an external battery with CHSG LARGE BATT BOX.
8.1
SV9100 System Hardware Manual
C
ONNECTION
Installing the Internal Batteries 19" (CHS2UG-US) Chassis
An internal battery source using two batteries can be installed using the CHS2UG
BATT MTG KIT (mounting kit) and CHS2U BATT CABLE INT (internal cabling).
CHS2UG BATT MTG KIT (Backup time = 10 Minutes/24 Terminals)
1. Power down the CHS2UG-US chassis
Ensure the CHS2UG-US chassis is powered OFF.
IMPORTANT
2. Disconnect AC power and grounding cable from rear of chassis.
3. Remove screws from battery access panel on rear of chassis.

Figure 3-107 Removing Battery Access Panel

3-87