Figure 6-39 Stowing The Bottom Unit Cable; Figure 6-40 Insert Stopper For Handset Use - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 6-39 Stowing the Bottom Unit Cable

Cut or trim the supplied coupled device for the tilt legs handset option.

Insert the stopper coupled device into the right and left tilt legs (see

Figure 6-40 Insert Stopper for Handset

Set the coupled device for tilt legs into position.

Reinstall the legs, pushing upwards until both locks snap into place.

Set tilt legs to desired position.

Place the multiline terminal with the numbered keypad up.

Connect the Line cord and the AC adapter.

Installing SV9100 Cordless Telephones

Table of Contents