Figure 6-14 Inserting Screws For Wall Mounting; Figure 6-15 Wrapping The Ac Adapter Cord Around The Strain Relief - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Wall Mounting the Charging Unit

The charging unit can be wall mounted as well. Before mounting the charging unit,

consider the following:

Select a location away from electrical cables, pipes, or other items behind the

mounting location that could cause a hazard when inserting screws into the

Make sure the wall material can support the weight of the charging unit.

Use #10 screws with anchoring devices suitable for the wall material where the

charging unit will be placed.

To mount the charging unit:

Insert two mounting screws as shown below. Allow about 3/16 of an inch

between the wall and screw heads for mounting the telephone.

Figure 6-14 Inserting Screws for Wall Mounting

Plug the AC adapter in the charging unit. Wrap the AC adapter cord around

the strain relief.

Installing SV9100 Cordless Telephones

Table of Contents