Figure 9-6 Connecting Cable To The Pgd(2)-U10 Adp - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Figure 9-6 Connecting Cable to the PGD(2)-U10 ADP

Repeat Steps 4 and 5 for any additional connection required.

Replace the cover and tighten the screw to hold the cover in place.

If required for the function being used, insert the RCA connectors into the

CN2 (Channel 1) and CN3 (Channel 2) connectors on the back of the

PGD(2)-U10 ADP.

Flat-head screwdriver

Table of Contents