Figure 5-55 Wall Mounting Base On Wall Plate; Figure 5-56 Wall Mounted Multiline Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
4.7.1.4 Wall Mounting the Base on a Wall Plate
1. Locate the screw holes on the base and hang the cover over
the screws on the wall plate as illustrated in
Mounting Base on Wall
2. Hang the multiline terminal on the base.

Plate.

Figure 5-55 Wall Mounting Base on Wall Plate

Figure 5-56 Wall Mounted Multiline Terminal

Because of variation in wall plates, this method is not
recommended.
Figure 5-55 Wall
5-59