Table 4-41 Gcd-Rga Status Leds - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:
Table of Contents

Advertisement

Issue 3.0

Table 4-41 GCD-RGA Status LEDs

Reset
Bus LED
Red
Run LED Orange
SF
Slow Flash
MF
Medium Flash
FF
Fast Flash
SV9100 System Hardware Manual
6.4.4
Status LEDs
The table below shows the user-level description of the front panel
LEDs in RGA mode.
Reset Just
Booting
Released
OS
Running
Red
Green
SF
SF
6.4.5
LED Indications
Active LED – Red/Green
The Active LED is controlled by the DSP and indicates the board
operational status. The LED has red/green capability.
Reset: red solid on, green solid on.
GCD-CP10 not detected: solid green.
DSP waiting for application code download: flash green once per
second.
Router application running: flash green twice per second.
Voice processor not running: flash red and green (orange) twice per
second.
Third party application running: flash green five times per second.
Busy/App LED – Red/Green
The Busy/App LED is controlled by the main processor and indicates the
port status. The LED has red/green capability.
Reset or main processor boot problem: red solid on, green solid on
(orange).
Main processor booting: solid green.
Router application communicating on backplane: off.
One or more ports active after third party application running: solid
red.
Running with
OS
0 License
Apps
Green
Green
MF
FF
Licensed
Licensed
Licensed
APP on
APP is
App has
RGA
Running
Port Busy
Off
Off
MF
FF
Red
FF
4-103

Advertisement

Table of Contents
loading

Table of Contents