Figure 9-108 Ada-L Out Jack Connection - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
13.3.3 ADA-L UNIT Connection
The mini-plug connection cord should not use an attenuator. Use a
monaural (single ring) mini-plug connection for normal recording.
CAUTION
13.3.3.1 ADA-L UNIT Connection for Recording Only
10.
11.

Figure 9-108 ADA-L OUT Jack Connection

13.3.3.2 ADA-L UNIT Connection for Sending Recorded Calls to
the Telephone
1.
Set the ADA-L UNIT DSW switches (Refer to
ADA-L UNIT on page 9-123).
Set DSW 6 to ON.
❍
DSW switch 5 is used to change the output
❍
NOTE
level from the OUT jack of the ADA-L
UNIT
(On = Low, Off = High).
Using the mini-plug connection cord, connect the ADA-L
UNIT Out jack to the cassette recorder MIC jack (Refer to
Figure 9-108 ADA-L OUT Jack Connection on page
Set the ADA-L UNIT DSW switches (see
ADA-L UNIT on page 9-123).
Set DSW 6 to ON.
❍
When sending recorded calls to the
❍
NOTE
telephone, set DSW switch 1 to ON.
Figure 9-104
.
9-127)
Figure 9-104
9-127