Figure 6-49 Separate Tilt Leg From Leg Support - NEC Univerge SV9100 System Hardware Manual

S 5 B
ECTION LUETOOTH
5.1
6-38
H A
UB DAPTER
Bluetooth Hub Adapter (BHA) Features
The BHA-L UNIT adapter connects a Bluetooth device to a multiline terminal. The
BHA-L UNIT cannot be connected to the DTL-2E-1, DTL-6DE-1 or DTL-12E-1
telephone.
5.1.1 Installing the BHA-L UNIT
IMPORTANT
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
Only one BHA-L UNIT can be attached to the DTL multiline

terminal.
3. Lower the tilt leg to the first position (refer to
Leg from Leg

Figure 6-49 Separate Tilt Leg from Leg Support

Tilt Leg
4. Remove the connector cover (rubber) from the bottom of the multiline
terminal (see
6-39).
Before installing or removing the BHA-L UNIT, remove the
line cord and the AC adapter from the outlet.
Support).
Figure 6-50 Removing the Connector Cover on page
Installing SV9100 Cordless Telephones
Issue 3.0
Figure 6-49 Separate Tilt
Stoppers