Figure 5-87 Install Plastic Panels; Figure 5-88 Remove Plastic Panels - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Figure 5-87 Install Plastic Panels

Removal and Replacement of the BS( )-L Kit (Ten Key Kit)

The Business BS( )-L Kit (in black or white), is commonly delivered with the

UNIVERGE SV9100 multiline terminal. If required, the BS( )-L Kit can be

removed and replaced on the DT300/DT700 Series multiline terminal.

The Retro BS( )-L Kit is an optional kit available to be used with the IPK II

and IPS terminals.

Remove the BS( )-L Kit

Install the Numbered Keypad Panel on the multiline

terminal. Refer to

Figure 5-87 Install Plastic

Pry the right side panel from the multiline terminal (refer to

Figure 5-88 Remove Plastic

Desi Printer

Desi Printer

Table of Contents