Figure 5-89 Remove The Ten Key Kit; Figure 5-90 Install The Ten Key Kit - NEC Univerge SV9100 System Hardware Manual

5-82
2. Remove the Numbered Keypad panel. (Refer to paragraph
Figure 5-89 Remove the Ten Key
3. Carefully pry and lift the Ten Key kit from the multiline
terminal.

Figure 5-89 Remove the Ten Key Kit

5.2.7.2 Install the BS( )-L Kit
1. Slide replacement Ten Key kit into position. Tabs of kit fit into
holes on the multiline terminal.

Figure 5-90 Install the Ten Key Kit

Installing DT Series Digital and IP Multiline Terminals
Issue 3.0
Kit.)