Figure 3-127 Removing Fan Access Panel; Figure 3-128 Connecting External Battery To Chs2Ug-Us - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
3. Remove fan access panel from rear of CHS2UG-US chassis.

Figure 3-127 Removing Fan Access Panel

4. Connect one end of Battery Connection Cable to Battery Connector
on rear of Basic and Expansion chassis.

Figure 3-128 Connecting External Battery to CHS2UG-US

5. Connect other end of cable to Battery Connector on rear of CHSG
LARGE BATT BOX chassis. Refer to
LARGE BATT BOX Connection
BATT BOX Connection on page
Figure 3-129 Single CHSG
or Figure 3-130 Dual CHSG LARGE
3-100.
3-99