Figure 5-46 Attach Tilt Legs To Dt Series Terminal - NEC Univerge SV9100 System Hardware Manual

5-54
4.6.2 Install Tilt Legs
1. Place the telephone on a flat surface (button side down).
2. Lay the adjustable Tilt legs on top of the telephone. Refer to
5-46 Attach Tilt Legs to DT Series
3. Push the Tilt Legs upward until they snap into place.
4. Lift both ends of Tilt Legs until they come together (refer to
5-47 Connecting the Tilt Legs on page

Figure 5-46 Attach Tilt Legs to DT Series Terminal

Installing DT Series Digital and IP Multiline Terminals
Terminal.
5-55).
Issue 3.0
Figure
Figure