Figure 5-68 Remove Side Panel From Multiline Terminal; Figure 5-69 Ribbon Cable Connector - NEC Univerge SV9100 System Hardware Manual
Hide thumbs
Also See for Univerge SV9100:
- Features and specifications (1403 pages) ,
- Programming manual (954 pages) ,
- Manual (766 pages)
Table of Contents
Advertisement
Issue 3.0
SV9100 System Hardware Manual
2.
Pry the side panel from the multiline terminal.
Figure 5-68 Remove Side Panel from Multiline Terminal
Side Panel
3.
Remove the screw (refer to
from Multiline
Terminal).
4.
Carefully, return the multiline terminal to the buttons side up.
5.
Remove the Softkeys and Line Key kit from the telephone.
6.
Gently lift the small black bar to open the ribbon cable
connector.
Figure 5-69 Ribbon Cable Connector
Screw
Figure 5-68 Remove Side Panel
Lift
Here
5-69
Advertisement
Chapters
Table of Contents
